The purpose of mold maintenance is to quickly find out the problem points and solve them, so that the mold can be restored to its original state and can continue to produce products that meet the standards.

Products made from the same mold have the same size and shape, that is, part or all of the size and shape are completed after each process. Therefore, when the product has a variation, the processing station can be found according to the variation part. And repair it to restore it to its original state. If the result of the judgment is a design error, the design must be changed. Mold maintenance is based on this principle.

The Main Points Of Stamping Die Overhaul

The following points can be used as reference for maintenance:

1. Measure the final product punched out, check the inspection standards to determine the variation, and check the LAYOUT to measure whether the size of the project is the same as the mold drawing, and whether the size is different. If necessary, measure the related projects before and after to be accurate. Determine the place and cause of the variation, and then implement countermeasures to solve it.

2. When you are unable to determine or propose countermeasures by yourself, you should ask others for advice, and don't act arbitrarily.

3. Too big hair

4. Bite the mold

5. Size variation

6. Mold damage