Manufacturing Process
Parts Material
Industry & Application
Add sulfuric acid to a clean scrubber. If triethylamine is used, the solution must contain 23% sulfuric acid. If the solution is to be prepared in the scrubber, first add water and then slowly add concentrated sulfuric acid, and there should be good agitation, exothermic reaction...
The new way to purify molten iron involves advanced techniques and methods that improve the quality and efficiency of the purification process...
There are many ways to settle the mold, and they are not the same. But they all have one thing in common, that is, efforts to organically combine the technical and economic indicators of the mold to produce mutual benefits for both parties. Make the mold from the evaluation to the quotation, from th...
The thread cutting process depends on the structure of the machined parts and the CNC machine tool used. Generally speaking, using the right cutting edge to process right-handed threads and using the left cutting edge to process left-handed threads has the advantage of stable support of the blade. O ...
Oval gears are widely used in automatic machinery and instrument industries, and are a type of non-circular gears. If strictly required, the elliptical gear can only be manufactured correctly on the CNC gear shaper, but the CNC gear shaper is very rare. In the case of small batches, the elliptical g ...
The cylinder telescopic sheath is a protective component that is installed on the oil cylinder, cylinder, hydraulic cylinder, etc., and then expands and contracts with it. It has the characteristics of waterproof, dustproof, corrosion-resistant, high-temperature resistance, etc., and is widely used ...
The manufacturing cycle is long. Operators are prone to fatigue. Once a failure occurs, it often takes a few seconds from human perception to take corresponding measures, which may lead to product scrap , Causing serious economic losses. ...
The Wu Steel Works has two workshops, one steelmaking workshop and the second steelmaking workshop. The second steelmaking workshop produces ordinary steel, and the first steelmaking workshop mainly produces small batches of steel grades such as special steel. The production processes include hot me ...
As we all know, adding an appropriate amount of rare earth elements to steel materials will have a significant impact on the structure and performance of the material. Usually the rare earth elements in steel are added in 0.05%~0.20%. Because the ratio of the atomic radii of rare earth to iron far e ...
In the steelmaking process, after the converter smelting is completed, the molten steel is poured into the ladle through the converter tap; ...
Quenching oil is the most widely used cooling medium in the heat treatment quenching process for a long time. Although quenching oil has many unique cooling characteristics, it also has problems such as energy consumption, environmental pollution and fire hazards. ...
Tel：769-81519985
Add：102,No.41,Changde Road,Xiaojiejiao,Humen
Town,Dongguan,China
E-mail：
sales@hmminghe.com